Wire.h Library - //free\\

return -999;

float readTemperature() Wire.beginTransmission(LM75_ADDR); Wire.write(0x00); // Temperature register Wire.endTransmission();

void setup() Wire.begin(); Serial.begin(9600); Serial.println("Temperature Monitor"); wire.h library

void loop() Wire.beginTransmission(0x3C); // Start transmission to device address 0x3C Wire.write(0x00); // Send command byte Wire.write(0x01); // Send data byte Wire.endTransmission(); // Stop transmission

Serial.print("Found "); Serial.print(devices); Serial.println(" devices"); delay(5000); return -999; float readTemperature() Wire

Wire.requestFrom(LM75_ADDR, 2); if(Wire.available() >= 2) lsb; return tempRaw / 256.0;

void receiveEvent(int bytes) while(Wire.available()) char c = Wire.read(); Serial.print(c); float readTemperature() Wire.beginTransmission(LM75_ADDR)

void loop() byte error, address; int devices = 0;