Sewer Pipe Without Digging !full! | Replacing Clay

The old solution was horrific: rent a jackhammer, tear up your driveway, destroy your landscaping, and dig a 6-foot-deep trench through your yard. The new solution?

| Method | Average Cost | Time | Landscape Damage | | :--- | :--- | :--- | :--- | | | $5,000 – $15,000 | 2-3 days | Severe (trench through yard) | | CIPP Lining | $4,000 – $10,000 | 4-6 hours | None (if cleanout exists) | | Pipe Bursting | $6,000 – $12,000 | 1 day | Minimal (two small pits) |

The steel bursting head is attached to the rod at the receiving pit. The new HDPE pipe is attached behind the bursting head. replacing clay sewer pipe without digging

If your home was built before 1970, there is a good chance your main sewer line is made of vitrified clay (VCP). For decades, clay was the gold standard. It was inert, cheap, and resistant to chemical corrosion.

A plumber sends a sewer camera down your cleanout. They confirm the clay is cracked and locate the exact start and end points. The old solution was horrific: rent a jackhammer,

Note: Lining is cheaper per foot than bursting, but bursting is cheaper than a full excavation if you have a long driveway. Yes, with one warning. Trenchless pipe bursting is objectively superior to digging for most clay pipe failures. It is faster, cheaper, and leaves your patio and roses intact.

A hydraulic machine pulls the rod back toward the house. The bursting head shatters the clay pipe outward. As the head moves, the new pipe glides into the exact path of the old one. The new HDPE pipe is attached behind the bursting head

The crew digs a "launch pit" near your house foundation and a "receiving pit" near the property line or city tap. This is minimal disruption compared to a full trench.